Firewall feed-thru bulkhead, 22 cavity Weatherpack® connector

SAME CONNECTORS USED BY NASCAR TEAMS OFF ROAD AND ENDURANCE RACE TEAMS

DELPHI PACKARD, Weatherpack Connectors.

This kit provides everything (except the crimp tool and cavity plugs) to install a feed-thru bulkhead into a vehicle. It is designed to mount through a circular opening using two 1/4-20 mounting studs. The bulkhead utilizes GM Weatherpack type terminals which incorporate individual cable seals. The flange side of the connector which mounts through the firewall sheet metal also incorporates a body seal, which provides full weather-resistant sealing to the connector system. Once the connector is in place, the free-hanging connector attaches to the fixed receptacle using a threaded mount which is secured by using a ¼” hex socket.

Kit includes 16 and 12 gage male and female terminals, yellow and blue cable seals, TWR and SHD connectors and retaining locks. Requires 2-1/8” mounting hole and two 9-32” drilled mounting holes dimensioned as shown above.

THIS ITEM IS UNIQUE IN THAT YOU CAN NEATLY PASS YOUR WIRING THROUGH A FIREWALL OR FRAME WITHOUT BEING CONCERNED ABOUT ABRASION OR NOT BEING SEALED WELL FROM THE ELEMENTS. AN ADDED FEATURE IS IT CONTINUES THE CONTINUITY OF YOUR WIRING SYSTEM ALONG WITH LOOKING GOOD.

« UNEFFECTED BY WATER

« UNEFFECTED BY CHEMICALS

« UNEFFECTED BY VIBRATION

« UNEFFECTED BY TEMPERATURE

« UNEFFECTED BY DIRT

ü WILL NOT COME APART

ü MOLDED FROM MATERIAL TO WITHSTAND XTREME TEMPS -40 TO +257 degrees F.

ü INDEXED TO PREVENT MISMATCHING

ü EACH TERMINAL IS ISOLATED TO PREVENT SHORTING

ü PINS HELD SECURELY BY A HINGED BACK

ü EACH TERMINAL USES A SELF LUBRICATING SEAL